Collingwood 100w 24v DC Power Supply PDC/100

Collingwood 100w 24v DC Power Supply PDC/100

Part number:  PDC 100/24
100w 24v DC power supply

# Input: 88 ~ 264Vac 125 ~ 373Vdc(Withstand 300VAC surge for 5sec. Without damage)
# Input current: 2.5A/115Vac 1.5A/230Vac
# Output: 108W
# Rated current: 4.5A
# Voltage adjustment: 22.8 ~ 26.4V
# Material: Metal housing
# Secondary Wiring: Parallel
# Additional information:
# Protections:Short circuit/Over load/Over voltage
# Cooling by free air convection
# LED indicator for power on

WARNING: THIS PRODUCT HAS OPEN TERMINAL (BOTH MAINS INPUT, AND OUTPUT)
1. This power supply is intended for use as a component part of other equipment. When installing, ensure that all applicable safety standards e.g EN60950, UL 1950 etc. are complied with.
2. The power supply must be installed and fixed so that the appropiate mounting holes are earthed so the unit will meet with the relevant EMC directives.
3. This component power supply must be installed within a fire enclosure.
4. Ensure the power supply is suitable for your application and will be operated within its specific parameters.
5. If the equipment is to be permanently connected, then a readily accessible disconnect device must be incorporated in the fixing wiring, or if a plug connector is to be used, then ensure the socket outlet is installed near the equipment and that it is easily accessible.
6. This unit is intended to be chassis mounted.
7. The unit must be mountedin such a way that there is no access to the PSU, and any external metalwork must comply with the relevant safety standards creepage and clearance distances.
8. Ensure all plugs and leads are correctly oriented and fully mated with their respective sockets or connectors.

Collingwood Catalogue

Customer Reviews:

You may also be interested in this/these product(s)

Collingwood Dimmer Module Switch PDC/Dimmer Module £29.19