What Are the Best Soffit Lights for a UK Home?

Nov 16, 2026|Reece Knight
What Are the Best Soffit Lights for a UK Home?
By Reece Knight, KES Lighting & Home. Last updated 16th November 2026.

The best soffit light for most UK homes is a sealed IP65 downlight with the LED built in, recessed into the soffit board, at 2700K or 3000K. Our pick is the Collingwood H2 Pro Extreme CSP (£26.32, checked 16th November 2026): 52mm deep, IP65 from below and above, and switchable between 2200K, 2700K and 3000K. Where you cannot cut the board, fit a surface-mounted Astro Kos Round 140 (£106.26, checked 16th November 2026) instead. Where you can reach the fitting from a step ladder, under a porch canopy, a GU10 fitting is fine. Up on two-storey eaves, it is not.

That last point is the one to get right. A soffit light five metres up is a scaffold tower or a long ladder every time it needs attention, so a fitting with no lamp to change matters more there than anywhere else on the house.

Which soffit light should you buy?

Pick by the job, not the finish. We have grouped our range by where the light is going, because that decides the rating, the depth and whether a replaceable lamp makes sense.

The job Our pick Why
Eaves on a two-storey house Collingwood H2 Pro Extreme CSP (£26.32, checked 16th November 2026) Integrated LED, nothing to change at height, 52mm deep, IP65 front and back
A soffit board you cannot or will not cut Astro Kos Round 140 (£106.26, checked 16th November 2026) Surface mounted, integrated LED, 761 lumens at 3000K, phase dimmable
A smaller surface fitting for a lower soffit Astro Kos Round 100 (£82.80, checked 16th November 2026) Same family at 100mm high and 80mm across, 316 lumens
A porch canopy you can reach Astro Kos II (£46.80, checked 16th November 2026) Surface mounted, 85mm, IP65, takes one GU10 you can swap yourself
A recessed fitting with a softer glare Astro Kos Recessed (£39.50, checked 16th November 2026) Honeycomb louvre, 110mm across, 94mm deep, one GU10
A period porch in brass Astro Jura Coastal Downlight (£113.10, checked 16th November 2026) Solid brass, surface mounted, IP44, so keep it under cover

Prices were checked on the day above; the links carry the live price.

What IP rating does a soffit light need?

IP65 for any soffit that is open to the weather, which is most of them. The second digit is the water rating: 4 is splashing from any direction, 5 is jets of water. A soffit sees wind-driven rain from below, so we would not fit anything less than IP65 on open eaves. Our guide to IP65 and IP44 explains the numbers in full.

Look at the back of the fitting as well as the front. Behind a soffit board is the eaves, which is outside air, not a dry ceiling void. The Collingwood is rated IP65 from below and above, which is the point of it. The Jura Coastal (£113.10, checked 16th November 2026) is IP44, and we would keep it to a deep porch or a covered terrace where the rain cannot reach it.

Integrated LED or GU10: which is better for a soffit?

Integrated, if you need a ladder taller than you are to reach it. Replaceable lamps are a fine idea indoors. On eaves five metres up, the cheapest lamp in the world still costs you a tower hire to change.

The Collingwood is listed at L70 40,000 hours, which means the LED is expected to hold at least 70 per cent of its output for that long. At four hours a night, that is over twenty-seven years. It is a rating for the light output, not a promise about the whole fitting. The Kos Round 100 and 140 also have the LED built in and need no separate driver.

Under a porch canopy at door height, the sum flips. A GU10 fitting such as the Kos II in textured black (£46.80, checked 16th November 2026) lets you choose the colour and brightness and change the lamp from a step. Each Kos II takes one GU10 at 6W maximum, and we would fit the Astro Lamp GU10 LED 3.7W 3000K (£8.76, checked 16th November 2026), which gives 350 lumens and dims. The same lamp suits the Kos Recessed (£39.50, checked 16th November 2026), which takes a GU10 up to 61mm long. This one is 54mm.

Recessed or surface mounted?

Recessed, where the board allows it. A row of flush rings disappears into the eaves line and leaves the house looking the way it did in daylight. Surface fittings are the honest answer where there is no depth to recess into, or where you would rather not cut a new uPVC board.

Fitting Mounting Depth or projection Diameter
Collingwood H2 Pro Extreme CSP Recessed 52mm deep 90mm, cut-out 65 to 75mm
Astro Kos Recessed Recessed 94mm deep 110mm, cut-out 83mm
Astro Kos II Surface 85mm 85mm
Astro Kos Round 100 Surface 100mm 80mm
Astro Kos Round 140 Surface 140mm 115mm
Astro Jura Coastal Surface 114mm 75mm

Before you buy a recessed fitting, have your electrician look behind one board. The fitting's depth has to fit between the board and whatever is above it, with room for the cable. If it does not, go surface mounted rather than forcing it.

How far apart should soffit lights be?

No further apart than the pool of light each one throws is wide. The pool on the ground is twice the height times the tangent of half the beam angle, and you do not need to do that sum yourself, because we have done it for three of ours.

Fitting and beam Pool at 2.4m (porch) Pool at 5m (two-storey eaves)
Astro Kos Round 140, 31.2 degrees 1.3m 2.8m
Astro Kos Round 100, 34.9 degrees 1.5m 3.1m
Collingwood H2 Pro Extreme CSP, 40 degrees 1.7m 3.6m

Worked through: a house front 7.5 metres wide with eaves at five metres, lit with the Kos Round 140. Its pool is 2.8 metres across, so three fittings at 2.5 metre centres, the end ones 1.25 metres in from each corner, give pools that just overlap on the path. Two would leave a dark stripe in the middle; four would be more light than a front path needs.

Over a single front door under a porch at 2.4 metres, one fitting is enough. Centre it over the step, not the door, so the light lands on the face of whoever is standing there. Our porch light size and height guide covers the lanterns that go with it.

What colour temperature for soffit lights?

2700K on red brick, 3000K at the very most on anything else. Cooler light makes brick look grey and makes a house look like a car park. The Collingwood lets you set 2200K, 2700K or 3000K once at fitting; the Kos Round fittings are fixed at 3000K. So on a red-brick house, set the Collingwood to 2700K.

If you want the soffit lights to work with lanterns by the door, match the colour. Our warm white and cool white guide covers why mixing them looks wrong.

Who should fit soffit lights?

An electrician. We are a merchant, not one. In England, electrical work in a home comes under Part P of the Building Regulations (Approved Document P, checked 16th November 2026), and some jobs, such as a new circuit, have to be notified to building control. Wales has its own version; Scotland and Northern Ireland have separate rules. Your electrician will know which applies.

Ask for the soffit lights on their own switch, or on a timer, rather than wired to the hall light. Lights on the front of the house that come on every time someone goes upstairs annoy the neighbours.

The short version

  • IP65 on open eaves, front and back. IP44 only under a deep canopy.
  • Integrated LED where you need a tall ladder; GU10 where you can reach from a step.
  • Recessed where the board has the depth; surface mounted where it does not.
  • Space them no further apart than each pool of light is wide: about 2.8 metres for the Kos Round 140 at five metres.
  • 2700K on brick, never cooler than 3000K.

Frequently asked questions

Can you put downlights in a uPVC soffit?

Yes, if the fitting is rated for outdoor use and there is depth behind the board. Recessed fittings need a clean hole cut to the size on the listing and room above for the fitting and its cable. If the board cannot be cut or there is no depth, a surface-mounted fitting such as the Astro Kos II or Kos Round does the same job without a hole.

Do soffit lights need to be IP65?

On open eaves, we would say yes. IP65 is protected against jets of water from any direction, which is the right rating for a board that takes wind-driven rain from below. Under a deep porch or covered terrace, IP44 is our rule of thumb. Check that the maker lists the fitting for outdoor use in that position as well.

How many soffit lights do I need?

Divide the width of the house front by the width of the pool each fitting throws on the ground. A 7.5 metre front with eaves at five metres, lit with the Kos Round 140 and its 2.8 metre pool, needs three fittings at 2.5 metre centres. Over a single door under a porch, one is usually enough.

Are soffit lights dimmable?

Some are. The Astro Kos Round 100 and 140 are phase dimmable on leading and trailing edge dimmers. GU10 fittings such as the Kos II dim when you fit a dimmable lamp, such as the Astro Lamp GU10 LED 3.7W. Check the listing of the exact fitting before you buy a dimmer for it.

What colour should soffit lights be, black or white?

Match the soffit board, so the fitting disappears in daylight. White boards take white, black or anthracite boards take the dark finishes. The Collingwood H2 Pro Extreme CSP comes in white, black and anthracite; the Kos Round 140 in textured white and textured black. The light itself is the same colour whichever finish you pick.