The best vintage light bulb for most homes is an amber ST64 LED filament at 2200K that is bright enough to live with. Ours is the Vintage E27 LED Bulb 6.5Watt 2200K (£13.70, checked 16th November 2026): 630 lumens, dimmable, 64mm across and 143mm tall. It looks the part bare, and at 630 lumens it gives more than twice the light of the deep amber 1800K bulbs.
The trap with vintage bulbs is buying the prettiest one and finding it barely lights the room. The deep amber, spiral filament bulbs are lovely to look at and give a fraction of the light. That is fine, as long as you buy them knowing it.
Which vintage bulb should you buy?
Pick by what the bulb has to do. Every bulb below is an LED filament with an E27 screw cap unless we say otherwise.
| The job | Our pick | Light | Colour | Dims |
|---|---|---|---|---|
| One bulb that looks vintage and still lights the room | Vintage ST64 6.5W (£13.70, checked 16th November 2026) | 630 lumens | 2200K | Yes |
| The warmest, most candle-like glow | Vintage ST64 spiral 5W (£16.19, checked 16th November 2026) | 280 lumens | 1800K | Yes |
| A big bare globe over a table | Vintage Globe 5W (£12.95, checked 16th November 2026) | 280 lumens | 1800K | Yes |
| A slim bulb for a small shade or lantern | Vintage Tubular 4W (£12.95, checked 16th November 2026) | 200 lumens | 2100K | Yes |
| A gold-tinted pear with straight filaments | Astro Lamp ST64 Gold 3.5W (£25.53, checked 16th November 2026) | 250 lumens | 2100K | Yes |
| A clear globe where you want real light | Globe E27 LED Clear 8W (£25.80, checked 16th November 2026) | 800 lumens | 3000K | No |
Prices were checked on the day above, and the links carry the live price.
How bright is a vintage bulb?
Dimmer than you expect, and the warmer the glass, the dimmer it gets. Compare the ones above. The 6.5W ST64 gives 630 lumens. The 1800K spiral and globe give 280. The smoked E27 LED Smoke Bulb 4W (£19.94, checked 16th November 2026) is a decoration that happens to glow, and we would buy it only as one.
Work it through over a dining table with three pendants. Three 6.5W ST64s give 1,890 lumens between them. Three 1800K spirals give 840, less than half. Both look beautiful. Only one lets you see what you are eating.
Our rule: if the bulb is the only light in the room, buy the 6.5W ST64 or the clear globe, and count them. Our working figure for a living room is 100 to 150 lumens per square metre, so one 630 lumen bulb covers about 4 to 6 square metres and a bigger room needs more than one, or lamps alongside. If there are lamps and wall lights doing the work, buy the 1800K spiral and enjoy it. Our guide to lumens for a living room has the numbers for a whole room.
What are vintage bulbs called, and what do ST64, G95 and T45 mean?
You will see them sold as vintage, Edison or filament bulbs. They are the same thing: a clear or tinted glass bulb with visible filaments, which today means LED strips made to look like the old glowing wire. Every vintage bulb we sell is an LED filament.
The shape code tells you the size. The letters are the shape and the number is the width in millimetres, so it is worth reading before you check your fitting.
| Code | Shape | Example and size |
|---|---|---|
| ST64 | Pear or teardrop, the classic Edison shape | Vintage ST64 6.5W: 64mm wide, 143mm tall |
| G95 or globe | Round | Vintage Globe 5W: 95mm wide, 140mm tall |
| T45 | Tube | Vintage Tubular 4W: 45mm wide, 110mm tall |
Then check the cap. Most vintage bulbs, ours included, have an E27 screw cap. A bayonet holder, the kind with two side pins, takes B22 instead. Our guide to E14 and E27 caps covers the difference.
Which fittings suit a vintage bulb?
Clear glass or no glass at all. A filament bulb is meant to be seen, so it belongs in a bare pendant, a cage, or a clear shade.
The Endon Travi Pendant (£56.75, checked 16th November 2026) has a clear glass shade 185mm across and an E27 holder, so a 64mm ST64 sits inside it with room around it. The Endon Hebden Pendant (£50.25, checked 16th November 2026) takes an E27 at 10W maximum, which every bulb in our table clears. For a truly bare bulb, the Endon Eltham Pendant (£30.55, checked 16th November 2026) is a brass rose, braided flex and holder with a drop you set from 200mm to 1615mm. Its holder is B22, so pair it with a B22 filament. Ours is candle-shaped, the Classic B22 LED Bulb 4.2Watt Filament 2700K (£7.25, checked 16th November 2026), at 470 lumens and dimmable.
Do not put a filament bulb behind opal or frosted glass. The filaments show through the lit glass as streaks, which spoils the even glow opal is for. Behind opal, use an ordinary frosted bulb. If you want a globe on show without the filament, the Astro Lamp E27 Large Globe 6W 2700K (£30.36, checked 16th November 2026) is matt white glass, 125mm across, and gives 540 lumens with the filament hidden.
1800K, 2200K or 2700K: which colour for a vintage bulb?
2200K for most rooms. It reads as properly warm and amber without turning everything orange. 1800K is candlelight: wonderful in a bar corner or over a dining table on a dimmer, too much as the only light in a kitchen. 2700K clear filament is ordinary warm white with the vintage look, the safe choice if the rest of the house is 2700K.
Do not mix them in one room. An 1800K pendant beside 3000K downlights looks like two different houses. Our warm white and cool white guide explains why.
Can you dim vintage bulbs?
Most of ours, yes, but read the listing. The 6.5W ST64, the spiral, the globe, the tube and the Astro gold all dim; the 8W clear globe and the 4W non-dimmable ST64 do not. A dimmable bulb works on a plain switch too, so even on a plain switch we would buy the 6.5W dimmable ST64: it gives 630 lumens to the 330 of the Vintage E27 LED Bulb 4Watt 2200K Non-Dimmable. A dimmable LED still needs a dimmer made for LEDs, and our dimming guide explains which. A non-dimmable bulb is made for a plain switch, so keep those off dimmer circuits.
The short version
- For one bulb that looks vintage and lights the room: the 2200K ST64 at 630 lumens.
- The deep amber 1800K bulbs give 280 lumens or less. Lovely, but not your main light.
- ST64, G95 and T45 are shape and width in millimetres. Check the width against the shade.
- Clear glass or bare flex only. Behind opal glass, filaments show as streaks.
- Check the cap: E27 screw for most vintage bulbs, B22 for a bayonet holder.
Frequently asked questions
What are vintage light bulbs called?
They are sold as vintage, Edison or filament bulbs, and all three mean a clear or tinted glass bulb with visible filaments. Today those filaments are LED strips made to look like the old glowing wire, so they use a fraction of the power. The shape code, such as ST64 or G95, tells you the shape and the width in millimetres.
Are vintage LED bulbs bright enough?
Some are and some are not. Our 2200K ST64 gives 630 lumens, the most of any amber vintage bulb we sell. The deep amber 1800K spiral and globe give 280. Our working figure for a living room is 100 to 150 lumens per square metre, so if the bulb is the only light in the room, choose by lumens first and the look second.
Can you use a vintage bulb in a table lamp?
Yes, if the cap matches and the shade is open enough to show it. Under a fabric shade you will not see the filament, so you are paying for a look nobody sees. In that case buy a plain warm white bulb for the light, and save the vintage bulb for a fitting where it is on show.
Do vintage bulbs work in a bayonet fitting?
Only a bayonet version will. Most vintage bulbs, ours included, have an E27 screw cap, and a bayonet holder with two side pins needs B22. We sell a candle-shaped B22 filament bulb at 470 lumens and 2700K, which suits a bare pendant such as the Endon Eltham. Check the holder before you order.
What is the warmest vintage bulb?
In our range, the 1800K bulbs: the ST64 spiral and the Vintage Globe, both dimmable. They give the deep amber, candle-like glow people mean by vintage. They are also among the least bright at 280 lumens, so they work best with lamps or wall lights doing the main lighting.








